PHECDA DRAG CHAIN MOD
3D printed adapters allowing 10x20 drag chain to be added to the Phecda Laser which fixes the poor OEM wire management. This modification is modeled around the 20w laser unit but the 10W appears to have a similar bolt pattern and will likely work. Installation does not require any permanent modification of the laser as existing fasteners an hole locations are used; however, this mod does require the removal of both flame sensors as the drag chain occupies the area in which they are fitted from stock. All parts are printed in strong carbon reinforced PETG and are quite tough.
If ordered without chain included please click here for chain confirmed to work with the printed parts (2 required).
Lepus believes in open source products that benefit makers, if you wish to print your own please click here where a downloadable .stl package is available.
3D printed adapters allowing 10x20 drag chain to be added to the Phecda Laser which fixes the poor OEM wire management. This modification is modeled around the 20w laser unit but the 10W appears to have a similar bolt pattern and will likely work. Installation does not require any permanent modification of the laser as existing fasteners an hole locations are used; however, this mod does require the removal of both flame sensors as the drag chain occupies the area in which they are fitted from stock. All parts are printed in strong carbon reinforced PETG and are quite tough.
If ordered without chain included please click here for chain confirmed to work with the printed parts (2 required).
Lepus believes in open source products that benefit makers, if you wish to print your own please click here where a downloadable .stl package is available.
3D printed adapters allowing 10x20 drag chain to be added to the Phecda Laser which fixes the poor OEM wire management. This modification is modeled around the 20w laser unit but the 10W appears to have a similar bolt pattern and will likely work. Installation does not require any permanent modification of the laser as existing fasteners an hole locations are used; however, this mod does require the removal of both flame sensors as the drag chain occupies the area in which they are fitted from stock. All parts are printed in strong carbon reinforced PETG and are quite tough.
If ordered without chain included please click here for chain confirmed to work with the printed parts (2 required).
Lepus believes in open source products that benefit makers, if you wish to print your own please click here where a downloadable .stl package is available.